Detailed Approval DrawingsComplete the guided review to create the final drawing set.
No detailed drawings yetChoose a STAAD model, check the starting connections, then generate the drawing set.

CONNECTION ASSIGNMENT

Assign Splice

Connection Detail Settings

Plate and bolt values are applied to this connection.
ADMINISTRATOR DATA VISUALIZER

Generated Frame Cross-Section Data

These are the normalized values passed to the common drawing composer.

STAAD2APPROVAL · 2D IMPORT

Assign Cross Sections To Frames

Choose the rigid-frame files, set the end-frame offsets and bay spacings, then assign a section to each frame. Locations are measured from the building start.

Up to 20 STD or ANL files · 20 MB combined · One vertical XY or YZ cross section per file
Frame count includes both ends. Bay/offset edits update locations and total length. Locations are also editable; moving one updates its adjacent bays. Use Space Equally to fit a chosen total length.

FrameBay Spacing (mm)Location (mm)Cross Section
Bracing By Bay · Optional

Enable Roof or Wall and enter the member size. Turning Roof on also turns Wall on; Wall can be adjusted separately. The first size fills empty rows.

BayRoofWallMember Size
You can update bracing and sag rods later from Bracing in the workspace.

Only the supplied cross sections are repeated. Longitudinal primary steel and bracing are not inferred. Review these in the existing workspace before issue.