STAAD.Pro

STAAD.Pro

Calculate a STAAD.Pro steel take-off directly from STD or ANL nodes, member incidences, section assignments and the structural profile catalogue.

STAAD.Pro

Expand a STAAD MEMBER PROPERTY list so each member gets its own line, or compact split lines back into TO ranges — including BY steps and hyphen ranges.

STAAD.Pro

Convert STAAD LOAD COMB n cards into LOAD n COMB plus REPEAT LOAD for later STAAD versions — or reverse the conversion without touching unrelated lines.

STAAD.Pro

Pull Cb and Lp from a STAAD ANL TAPERED (AISC SECTIONS) design listing, then optionally check AISC equation F2-1 from quarter-point moments.

STAAD.Pro

Check TAPERED STAAD properties against the original mill min/max limits. Clear web depth is overall depth minus both flange thicknesses, and exact limit values still pass.

STAAD.Pro

Parse MEMBER END FORCES from a STAAD ANL listing, pick Start or End, and read the 12-row signed governing envelope used for connection design.

STAAD.Pro

Parse SUPPORT REACTIONS from a STAAD ANL file into a foundation table: node and load filters, 0–3 decimal rounding, and signed envelopes.

STAAD.Pro

The seven office VB STAAD utilities now run in the browser: take-off, member lists, REPEAT LOAD, Cb, tapered mill checks, member end forces and support reactions.

STAAD.Pro

A pre-analysis STAAD.Pro checklist: geometry, properties, supports, loads, instabilities and the warnings you should read before anyone trusts ratios or exports to CAD.